Canon MV600i Instruction Manual Download

Page: 33 / 155

Mastering

the Basics

Searching and Reviewing when Recording

Record Review

In record pause mode, this function allows you to review the last few seconds of your

recording to check if it has been recorded properly.

Press and release the

(record review) button.

The camcorder rewinds the tape, plays back the last few seconds,

and returns to record pause mode.

Record Search

In record pause mode, this function allows you to play back the tape (forward or

reverse) to locate the point where you wish to begin recording.

Press and hold the REC button (forward) or –
button (reverse).

• Release the button at the point you wish to begin recording.

• The camcorder returns to record pause mode.

❍

Noise may appear on the screen when you play back the tape in reverse.

❍

There will be no sound during Record Review and Record Search.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

REC (record) SEARCH – button/

Record review button

REC button

2_D73PAL_E(13-42) 02.12.26 9:22 PM Page 33

Summary of Contents for MV600i




























































































































































Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands

Canon MV600i, Instruction Manual

Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands