Canon MV600i Instruction Manual Download

Page: 121 / 155

121

Using a Memory Car

MV630i

MV650i

Combining Images (Card Mix)

You can produce effects not possible with just a tape with the Card Mix function.

Choose one of the sample images provided on the supplied SD Memory Card (such as

picture frames, backgrounds and animations) and combine it with the live video

recording.

❍

Card Mix cannot be used in the Night and Super Night (MV650i) mode.

❍

Movies recorded on a memory card cannot be combined with

camcorder recordings.

❍

Make sure to load a cassette and to insert a memory card that contains card
mix images.

❍

Additional sample images are provided on the supplied DIGITAL VIDEO
SOLUTION DISK. For instructions on how to upload them to the memory card,
refer to

Adding Still Images from Your Computer to the Memory Card

in the

DIGITAL VIDEO SOLUTION DISK Software Instruction Manual.

❍

Reselect the card mix image when you have turned off the camcorder or
changed the position of the program selector.

Card Mix Effects

You can select from the following 4 types of Card Mix effects:

Card Chroma Key (CARD CHROMA)

Combines frames with your recordings. The live video recording will appear in place of

the blue area of the card mix image. If you create your own frame, make sure that the

area the live recording should appear is blue.

Mix level adjustment: blue area of the still image.

MV650i

Live video recording

Card mix image

5_D73PAL_E(99-132) 02.12.26 9:30 PM Page 121

Summary of Contents for MV600i




























































































































































Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands

Canon MV600i, Instruction Manual

Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands