Canon MV600i Instruction Manual Download

Page: 40 / 155

Mastering

the Basics

4. If connecting to a TV, set the input selector to VIDEO. If connecting to a

VCR, set the input selector to LINE.

The SCART Adapter PC-A10 is for output only. For analog line-in recording or
analog-digital conversion, please use a SCART adapter with input capability
(commercially available).

TVs with S (S1)-Video Input Terminal

Refer also to the TV or VCR instruction manual.

1. Turn off all devices before starting the connections.

2. Connect the S-150 S-video Cable (optional) to the S-video terminals.

3. Connect the STV-250N Stereo Video Cable to the camcorder’s AV

terminal and the audio terminals of the TV/VCR.

Connect the white plug to the white AUDIO terminal L (left), and the red plug to the

red AUDIO terminal R (right). Do not connect the yellow plug.

4. If connecting to a TV, set the input selector to VIDEO. If connecting to a

VCR, set the input selector to LINE.

VIDEO

S(S1)-VIDEO

INPUT

AUDIO

Signal flow

S-150 S-video Cable (optional)

Signal flow

STV-250N Stereo Video Cable (supplied)

2_D73PAL_E(13-42) 02.12.26 9:22 PM Page 40

Summary of Contents for MV600i




























































































































































Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands

Canon MV600i, Instruction Manual

Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands