Canon MV600i Instruction Manual Download

Page: 64 / 155

Using the Full Range

of Featur

Effects

Art (ART)

The image becomes like a paint (solarization).

Black and White (BLK & WHT)

The image becomes black and white.

Sepia (SEPIA)

The image becomes monochrome with a brownish tint.

Mosaic (MOSAIC)

The image is blurred through enlarging the size of some pixels.

Ball (BALL)

The image becomes like a ball.

Cube (CUBE)

The image becomes a cube and rotates.

Wave (WAVE)

Both ends of the image sway in waves.

Colour Masking (COLOR M.)

The image becomes a rhombus surrounded by a masking frame that

changes the colours.

Mirror (MIRROR)

Creates a symmetrical image as if there would be a mirror in the

centre of the screen.

Only Black and White can be used in CARD CAMERA mode.

MV630i

MV650i

3_D73PAL_E(43-85) 02.12.26 9:26 PM Page 64

Summary of Contents for MV600i




























































































































































Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands

Canon MV600i, Instruction Manual

Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands