Canon MV600i Instruction Manual Download

Page: 105 / 155

105

Using a Memory Car

MV630i

MV650i

Recording from Other Video Devices

You can record images from devices connected via the S-video terminal or AV terminal

(analog line-in function), or via the DV terminal as still images on a memory card.

When recording via the AV terminal, make sure that “AV

DV” is displayed on

the screen. When recording via the DV terminal, make sure that “AV

DV” is

not displayed. Change the setting as necessary (

92).

1. Connect the camcorder to the video device.

• S-video/AV terminal: See

Playing Back on a TV Screen

(

39).

• DV terminal: See

Connecting a Digital Video Device

(

87).

2. Set the camcorder to PLAY (VCR) mode.

If a cassette is loaded, make sure the tape is stopped.

3. Connected device: Load a recorded cassette and play back the tape.

4. Press the PHOTO button halfway when the scene you wish to record

appears.

• The still image, remaining image capacity and other information appear.

• When you press the PHOTO button on the wireless controller, recording starts

immediately.

5. Press the PHOTO button fully.

• The card access indicator flashes.

• The still image shown on the screen will be recorded on the memory card.

❍

A still image recorded from an image in 16:9 format will be vertically
compressed.

❍

The data code of the still image will reflect the date and time it has been
recorded on the memory card.

❍

There will be no shutter sound in PLAY (VCR) mode.

❍

The image size of a still image recorded from other video devices will be
640

480.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

5_D73PAL_E(99-132) 02.12.26 9:30 PM Page 105

Summary of Contents for MV600i




























































































































































Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands

Canon MV600i, Instruction Manual

Search results

Summary of Contents for MV600i

Reviews:

Related manuals for MV600i

Brands by name

Popular brands