Canon MV550i Instruction Manual Download

Page: 75 / 164

Using the Full

Range of Features

Using the DM-50 Microphone (optional)

MV550i

The highly sensitive Directional Stereo Microphone DM-50 has been designed
exclusively for camcorders equipped with an advanced accessory shoe

. It is

98).

Refer to the DM-50’s instructions for further details.

Turn the camcorder’s power off before attaching/removing the microphone.

1. Slide the microphone onto the accessory shoe and tighten with the

shoe lock.

• Slide in the direction of the arrow on the bottom of the microphone until it

clicks securely into place.

• Make sure that the microphone does not come disconnected when turning

the shoe lock.

2. Set the camcorder to TAPE CAMERA mode.

•

(Connection) appears in the display.

3. Set the microphone’s directivity switch.

SHOTGUN:

Clearly picks up sound arriving from the front of the microphone
(monaural).

STEREO1:

Picks up sound arriving from the front of, as well as sound
surrounding the microphone.

STEREO2:

Picks up sound surrounding the microphone in a wider range than
STEREO 1.

Notes:

• Never carry the camcorder holding the microphone.
• The DM-50 will not pick up any sound if another microphone is attached to the

camcorder’s microphone terminal.

;;;

;;;;;

#3_ MV550i/530i__E(39-86) 1/9/02 14:49 Page 75

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV550i





































































































































































Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands

Canon MV550i, Instruction Manual

Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands