Canon MV550i Instruction Manual Download Page 126

Page: 126 / 164

126

Using a Memory Card

Copying Memory Card Still Images to a Cassette

REC

FOCUS

AE SHIFT

SLIDE SHOW

Make sure a memory card that has images recorded on it and a cassette that has
enough recordable space have been inserted into the camcorder.

1. Locate the point on the cassette where you want to start copying

and set it to stop.

2. Select the first image you want to copy by using the CARD +/–

buttons.

• Still images on the memory card including and after that image will be

copied onto the cassette.

• If you want to copy all the still images on the memory card, select the first

image.

3. Open the menu and select CARD OPER.

4. Select COPY

• CANCEL and EXECUTE settings appear.

5. Select EXECUTE.

• Select CANCEL to stop copying.
• Cassette and card information appear in the display and copying starts.
• NOW COPYING

appears in the display.

• Each image is copied for about 6 seconds on the cassette.
• Copying stops when all the images have been copied or the tape is full.

6. Press the

button when your desired images have finished

copying.

[ ]

PLAY

(VCR)

CARD

PLAY

(VCR)

TAPE

COPY

CARD OPER.

[ ]

(

40)

Copies multiple still images from the memory card to a cassette.
• The still images’ data codes will reflect the date and time the copies are made.
•

The

SP and

LP recording modes are not available when copying

memory card images to a cassette.

MV550i

#5_ MV550i/530i__E(104-131) 1/9/02 14:54 Page 126

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV550i





































































































































































Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands

Canon MV550i, Instruction Manual

Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands