Canon MV550i Instruction Manual Download

Page: 14 / 164

Mastering

the Basics

6. Remove the battery pack after use.

• Rotate the viewfinder upwards.
• Press and hold the BATT. RELEASE button while you slide the battery up.

Notes:

• Never connect an unspecified product to the camcorder’s DC terminal.

Likewise, do not connect the power adapter to an unspecified product.

• You can find detailed notes for using the batteries in the “Notes on Using the

Batteries” (

134). These notes include charging and recording times and how

to install the backup battery.

Specifications

Power supply

100–240 V AC, 50/60 Hz

Power consumption

34 W

Rated output

9.5 V, 2.7 A DC

Operating temperature range

0°C–40°C (32°F–104°F)

Dimensions

104 mm (2

in)

Weight

180 g (6

oz) (without power cable)

Weight and dimensions are approximate.
Errors and omissions excepted.
Subject to change without notice.

CA-560 Compact Power Adapter

#2_ MV550i/530i__E(08-38) 1/9/02 15:26 Page 14

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV550i





































































































































































Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands

Canon MV550i, Instruction Manual

Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands