Canon MV550i Instruction Manual Download

Page: 115 / 164

115

Using a Memory Card

1. During/after recoding a still image, press the CARD

–

button to

open the CARD PHOTO REVIEW menu.

• If you press the button after recording a still image, the last image recorded

appears in the display.

• If you press the button while recording a still image, the menu appears

immediately.

• PROTECT

, IMAGE ERASE settings appear.

• If you select

RETURN, the still image disappears.

2. Select PROTECT

and press the selector dial in.

• The

protect mark appears on the image.

• Now you are unable to erase this image.
• Press the selector dial again to cancel it.
• If you select

RETURN, the still image disappears.

2. Select IMAGE ERASE and press the selector dial in.

• ERASE THIS IMAGE? NO YES appears in the display.

3. Select YES and press the selector dial in.

• The image is erased.

To erase an image

To protect an image

CARD PHOTO REVIEW

CAMERA

CARD

●

Erasing still images

Erase images singly or all at once.
• You cannot erase protected images. Cancel image protection first in order to

erase an image.

• Erase images with caution. Once an image has been erased, it cannot be restored.

There are 3 ways to erase a single image.

To erase images one at a time

➡

CARD PHOTO REVIEW menu (

115)

➡

File Operation menu

(

116)

To erase images one at a time or erase all images on the memory card at once

➡

Card Operations submenu

(

120)

: When playing back an image in CARD PLAY (VCR) mode

: When displaying an index screen in CARD PLAY (VCR) mode

INDEX

SINGLE

PLAY

(VCR)

CARD

SINGLE

PLAY

(VCR)

CARD

CAMERA

CARD

#5_ MV550i/530i__E(104-131) 1/9/02 14:54 Page 115

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV550i





































































































































































Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands

Canon MV550i, Instruction Manual

Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands