Canon MV550i Instruction Manual Download

Page: 105 / 164

105

Using a Memory Card

Inserting and removing the memory card

MultiMediaCard

MMC-8M

MultiMediaCard

MMC-8M

MultiMedia

1. Turn the POWER switch to OFF.

• When removing the memory card, make sure the card access indicator is off.

2. Open the memory card compartment cover in the direction of the

arrow.

3. Insert or remove the memory card.

• Push the memory card all the way in.
• Remove the memory card by pushing the card in and letting it spring out.

4. Close the cover.

• When inserting the memory card, do not attempt to close the cover

forcefully without the memory card properly inserted.

Notes:

• When you set the camcorder to CARD PLAY (VCR) mode, the last image

recorded appears. If there are no images recorded on the memory card, NO
IMAGES appears in the display.

• Do not touch the memory card terminals.

Do not attempt to pull the memory card out without first pushing it in.

Selecting the recording image quality

Select the quality of a still image to be recorded.

QUALITY•••••FINE

CARD SET UP

(

40)

To change the image quality, open the menu and select CARD SET
UP. Then select QUALITY, set it to STANDARD and close the menu.

CAMERA

CARD

PLAY

(VCR)

TAPE

Card access
indicator

#5_ MV550i/530i__E(104-131) 1/9/02 14:53 Page 105

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV550i





































































































































































Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands

Canon MV550i, Instruction Manual

Search results

Summary of Contents for MV550i

Reviews:

Related manuals for MV550i

Brands by name

Popular brands