Canon MultiPASS C50, Software User'S Manual

Page: 146 / 198

Chapter 8 C50 Setup and Other Utilities in the Desktop Manager 8-3
C50 Setup and
Other Utilities in the
Desktop Manager
n
When the C50 is connected to your PC, we recommend that you use the
Setup Options dialog box in the Desktop Manager for Windows. Do not
make your changes via the operation panel of the C50. C50 data is
overwritten by the Desktop Manager for Windows software.
The following instructions summarise the procedures for changing the
C50 setup options in the Desktop Manager. For additional information,
refer to later sections in this chapter.
To change set-up options in the Desktop Manager:
1. On the Setup menu, click the group of set-up options you want to
change.
2. In the Setup Options dialog box, to display another group of options,
click the appropriate tab.
3. On the appropriate set-up tab, specify your changes.
4. To save any changes and close the dialog box, click OK. When
prompted, choose whether or not you want to overwrite the settings on
your C50.
To exit the dialog box without saving your changes, click Cancel.
When you save your changes, C50 setup options are saved in the Desktop
Manager, as well as on the C50.