manualshive.com logo in svg

Canon MultiPASS C100, User Manual

Share
Download
Canon MultiPASS C100 User Manual Download Page 166

13-10

Troubleshooting

Chapter 13

Message

Error Code Cause

Action

MEMORY FULL

(Continued)

MEMORY USED nn %

NO RX PAPER

NO TEL #

NOT AVAILABLE

PHOTO INK IN USE

—

#012

#022

#025

—

The unit’s memory is full
because you tried to
send or copy too many
pages at once, or a very
long or detailed
document.

Shows the percentage 
of memory currently 
in use.

The other party’s fax
machine is out of paper
or its memory is full.

The one-touch speed
dialling button or coded
speed dialling code you
entered has not been
registered.

In manual sending via
the handset, you entered
a speed dialling number
that is assigned to a
group.

The Photo BJ cartridge 
is installed in the unit.

Divide the document and
send or copy each part
separately. To free up
space in the unit’s memory,
print or delete any
documents in memory you
no longer need. 
(

1

pp. 7-17, 7-19, 8-11, 

8-13)

If you need more space,
wait for the unit to send
any faxes. Also, print or
delete any documents in
memory you no longer
need. (

1

pp. 7-17, 7-19, 

8-11, 8-13)

Contact the other party and
have them load paper in
their fax machine or free
up space in their fax
machine’s memory.

Register the one touch
speed dialling button or
coded speed dialling code.
(

1

pp. 6-3, 6-6)

Use regular dialling, or
enter a one touch speed
dialling button or coded
speed dialling code that
only has one fax/telephone
number registered.

Change to a different BJ
cartridge type if necessary.
(

1

p. 12-12)

Summary of Contents for MultiPASS C100



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands