manualshive.com logo in svg

Canon MultiPASS C100, User Manual

Share
Download
Canon MultiPASS C100 User Manual Download Page 151

Chapter 12

Maintenance

12-15

Maintenance

9

Insert the BJ tank into the far right slot 
on the BJ cartridge, then press it down
from the top until it clicks into position.

10

For the Colour and Photo BJ cartridges,
repeat steps 8 and 9 to install the other
BJ tanks. Be sure to install them in the
correct order and to insert them in the
slots from right to left.

• Do not use the BJ cartridge with any of its

BJ tanks missing as this can cause the BJ
cartridge to clog.

11

Close the printer cover.

• The LCD displays 

CART. RETURN

while

the cartridge holder moves to its home
position on the right side of the unit. The
MultiPASS then cleans the print head which
takes about 20 seconds.

12

Close the document tray.

13

Align the print head. (

1

p. 12-16)

n

If you need to unplug the MultiPASS, wait until the unit is in standby mode (time and
receive mode displayed in the LCD). Otherwise the cartridge holder may not be in its home
position causing the BJ cartridge to remain uncapped and dry out.

InkTa

BCI-

Yellow

Made 

in Japan

PUSH

InkT

ank

BCI-

3eM

Yello

w

Made

 in Ja

pan

PUSH

PUSH

Summary of Contents for MultiPASS C100



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands