manualshive.com logo in svg

Canon MultiPASS C100, User Manual

Share
Download
Canon MultiPASS C100 User Manual Download Page 11

Chapter 1

Introduction

1-3

Intr

oduction

TX/RX NO.

TX/RX NO. is the abbreviation used for Transaction number.

TX

Denotes Sending.

RX

Denotes Receiving.

In addition, this guide uses distinctive typefaces to identify buttons and information in
the LCD:
• The buttons you press appear in this typeface: Stop.
• Information in the LCD appears in this typeface: 

USER SETTINGS

.

Customer Support

Your MultiPASS is designed with the latest technology to provide trouble-free operation.
If you encounter a problem with the unit’s operation, try to solve it by using the
information in Chapter 13. If you cannot solve the problem or if you think your
MultiPASS needs servicing, contact your local authorised Canon dealer or the Canon
help line.

Summary of Contents for MultiPASS C100



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands