Canon MultiPASS C100 User Manual Download Page 142

Page: 142 / 210

12-6

Maintenance

Chapter 12

Clean the shaded areas of the operation
panel.

• Dirt and dust particles that collect on the

underside of the operation panel affect the
quality of the documents you copy or send.

Use a clean, soft, dry, lint-free cloth
to wipe up paper dust from the areas
(shaded) surrounding the separation
roller.

When you are finished, close the
operation panel by pressing it down from
the centre.

• Be sure to close the operation panel until it

locks into place, or the unit will not function
properly.

Close the document tray.

Reconnect the power cord.

Cleaning the Rollers

You may need to clean the MultiPASS’ rollers after using a package of high resolution
paper. This process removes paper dust from the unit’s rollers, preventing paper feed
problems. For details,

p. 5-10.

SEPARATION ROLLER

Summary of Contents for MultiPASS C100



















































































































































































































Search results

Summary of Contents for MultiPASS C100

Reviews:

Brands by name

Popular brands

Canon MultiPASS C100, User Manual

Search results

Summary of Contents for MultiPASS C100

Reviews:

Brands by name

Popular brands