12-41
Machine Settings
SYSTEM SETTINGS
8. POP PASSWORD
Enters the password for access to the POP server (max. 32
characters).
9. POP INTERVAL
Sets the interval you want the POP server to check for incoming
e-mail. If the interval is set to 0, the POP server is not checked
automatically (0MIN.–99MIN.).
8. STARTUP TIME SET.
Sets the time period required to delay the startup of network
communications for the machine (0SEC–300SEC).
6. COMMUNICATIONS*
Sets the fax and e-mail communication.
1. COUNTRY SELECT
Select the country or area where the machine is used.
2. E-MAIL SETTINGS
Sets the e-mail communications.
1. MAX TX DATA SIZE
Sets the maximum data size for outgoing e-mail messages. If
the e-mail message exceeds this data size limit, it is split up into
several e-mail messages before being sent (0MB-99MB).
2. DIVIDED OVER MAX
Sets whether to divide a document into separate files when it is
sent if its size exceeds the data size you specify.
OFF
ON
–
–
3. FAX SETTINGS
Sets the facsimile communication.
1. TX START SPEED
Sets the transmission start speed for faxes.
(33600bps, 2400bps, 4800bps, 7200bps, 9600bps, 14400bps)
2. RX START SPEED
Sets the reception start speed for faxes. (33600bps, 2400bps,
4800bps, 7200bps, 9600bps, 14400bps)
3. R-KEY SETTING
Registers the [R] key to access an outside line easily. (See
Chapter 4, “Sending and Receiving (MF4690PL Only),” in the
Reference Guide.)
PSTN
PBX (HOOKING/PREFIX)
–
–
4. MEMORY LOCK
Sets whether to receive and store all documents in memory
and not to print automatically. (See Chapter 4, “Sending and
Receiving (MF4690PL Only),” in the Reference Guide.)
* MF4690PL Only