Machine Settings
12-14
TX/RX SETTINGS (MF4690PL Only)
1. TWO-SIDED PRINT
Sets whether the machine prints received documents on both
sides of the paper. (See Chapter 4, “Sending and Receiving
(MF4690PL Only),” in the Reference Guide.)
OFF
ON
–
–
2. RECEIVE REDUCTION
Sets whether the received images print out at a reduced size.
(See Chapter 4, “Sending and Receiving (MF4690PL Only),” in the
Reference Guide.)
ON
Image reduction is turned on.
1. RX
REDUCTION
Selects the reducing type.
AUTO
FIXED REDUCTION (90%, 95%, 97%, 75%)
–
–
2. REDUCE
DIRECTION
Selects the reducing direction.
VERTICAL ONLY
HORIZ & VERTICAL
–
–
OFF
Image reduction is turned off.
3. RX PAGE FOOTER
Sets whether to insert the machine’s fax number and the sender
information on received faxes.
OFF
ON
–
–
4. CONT. PRINTING
Selects how the machine responds when the <TONER LOW/
PREPARE NEW TONER> message appears.
RX TO MEMORY
The machine stores all documents in memory.
KEEP PRINTING
The machine does not store documents in memory if the toner
runs out. Reset to <RX TO MEMORY> after replacing the toner
cartridge.