4-43
Sending Documents (MF4690PL Only)
4
Enter the desired three-digit code (000 to 191) with the numeric keys.
T E L = 0 1 2 3 X X X X X X
[ * 0 0 1 ] C A N O N
Ex.
If you entered a wrong code, press [Clear], then try again from step 3.
If you want to adjust the image quality and density, see “Scan Settings,” on p. 4-4.
5
Press
[Start].
When you set the documents on the platen glass, press [
] or [
] to select the document size, then
press [Start] for each document. When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if
you have specified the destination by any other method than using numeric keys, the machine starts
scanning automatically without pressing [Start], after the preset time for this setting is elapsed.