Canon MF4600 Series Basic Operation Manual Download Page 220

Page: 220 / 290

Troubleshooting

11-22

Error Codes

(MF4690PL Only)

An error code is a four-digit code shown on an ERROR TX REPORT or an ERROR RX
REPORT when an error occurs.

For details on reports, see Chapter 11, “Appendix,” in the Reference Guide.

See the table below for individual error codes.

Error Code

Description

Action

#0001

A document may be jammed.

Remove the jammed document.

#0003

An attempt was made to send a
document of 630 mm or longer
from the ADF.

–

Divide the document into smaller
parts and send from the platen
glass.

–

A document takes a long time to
send because it contains too much
data.

–

Reduce the scanning resolution
before sending.

–

A document takes a long time to
receive.

–

Contact the other party and ask
them to reduce their scanning
resolution or divide the document
into smaller parts for sending.

–

Summary of Contents for MF4600 Series



































































































































































































































































































Search results

Summary of Contents for MF4600 Series

Reviews:

Canon MF4600 Series, Basic Operation Manual, Page: 220 / 290

Search results

Summary of Contents for MF4600 Series

Reviews: