manualshive.com logo in svg

Canon MF4600 Series, Basic Operation Manual, Page: 222 / 290

Share
Download
Canon MF4600 Series Basic Operation Manual Download Page 222

Troubleshooting

11-24

Error Code

Description

Action

#0403

The same file name exists when you 
are scanning a document to a USB 
memory.

Press [OK] and rename the file.

#0406

Some kind of error has occurred in 
the machine when you are scanning 
a document to a USB memory (e.g., 
the USB memory is disconnected 
from the machine, or file system is not 
supported.).

Make sure that the USB memory is 
inserted correctly to the machine, or 
file system is supported.
Press [OK] and try again.

#0703

The memory for image data is full 
when sending documents.

Wait a few moments, and then try 
sending again after other send jobs 
are complete.
Erase documents stored in 
memory. If the machine still does 
not operate normally, turn the 
main power OFF, and then back 
ON.

–

–

#0705

The send operation was interrupted 
because the size of the image data 
is larger than that specified in <MAX 
TX DATA SIZE> in <E-MAIL/I-FAX> in 
<COMMUNICATIONS> in <SYSTEM 
SETTINGS>.

Change the setting for <MAX TX 
DATA SIZE> in <E-MAIL/I-FAX> in 
<COMMUNICATIONS> in <SYSTEM 
SETTINGS>.
Select a lower resolution. 
Set <DIVIDE INTO PAGES> to <ON> 
in send settings.

–

–
–

Summary of Contents for MF4600 Series



































































































































































































































































































Reviews:

No comments