![background image](http://html.mh-extra.com/html/canon/lv-7555/lv-7555_specifications_62526017.webp)
MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.4.6 CF_GAMMA
COMMAND
COMMAND “CF_GAMMA_%1”[CR]
%1
“000-015”------ Directly select for Gamma setting value
“UP”---------------- Current setting value +1
“DN”---------------- Current setting value-1
Details
Set the User Control Gamma Value.
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays) Only valid when it is in the
usual Power On state.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.7 CF_WBAL-
COMMAND
COMMAND “CF_WBAL-%1_%2”[CR]
%1
“R” ------------- Red
“G” ------------- Green
“B” ------------- Blue
%2
“000-063”-- Directly select color value by White Balance %1 determination.
“UP”------------ Color value for White Balance %1 determi1
“DN”------------ Color value for White Balance %1 determination-1
Details
Set the user control color value by white balance %1 determination.
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
usual Power On state.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.8 CF_COLTEMP
COMMAND
COMMAND
“CF_COLTEMP_%1”[CR]
%1
“000”-”003”
Details
Set the Color Temp.(When it is in usual Power ON state, this is valid.)
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
usual Power On state.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
Page 17 / 53