![background image](http://html.mh-extra.com/html/canon/lv-7555/lv-7555_specifications_62526013.webp)
MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
6.5 Status Read Command Table for Screen
Status Read Command
Item
CR_FLSCREN [CR]
Get Full Screen mode setting status
CR_SCREEN [CR]
Get selected screen size status
CR_KYSTNMODE [CR]
Get Keystone Store Mode setting status
CR_ANAMORPHIC [CR]
Get Anamorphicsettign status
CR_VSCALE [CR]
Get V Scale setting status
CR_VPOS [CR]
Get V Position setting status
CR_HSCALE [CR]
Get H Scale setting status
CR_HPOS [CR]
H Position setting status
6.6 Status Read Command Table for Lamp
Status Read Command
Item
CR_LAMPREPL [CR]
Get information for lamp replacement time
CR_LAMPMODE [CR]
Get lamp mode status
CR_PROJH [CR]
Get total projector running time
6.7 Sound Series Status Read Command Table
Status Read Command
Item
CR_VOLUME [CR]
Get Volume value
CR_MUTE [CR]
Get sound mute setting value
CR_BLTINSP [CR]
Get built-in speaker setting value
6.8 Status Read command Table for Setting
Status Read Command
Item
CR_BBACK [CR]
Get Blue Back setting value
CR_DISP [CR]
Get Display setting value
CR_LOGO [CR]
Get Logo setting value
CR_RCODE [CR]
Get selected remote control code status
CR_LANG [CR]
Get selected language status
CR_ON-STA [CR]
Get ON Start setting status
CR_P-MANE [CR]
Get Power management setting status
CR_P-MANETIME [CR]
Get setting time luimits for Power management
CR_FANSPEED [CR]
Get selected Fan Control Speed status
CR_KEYDIS [CR]
Get RC/KEY inhibit status
6.9 Get Other Status Read Command Table
Status Read Command
Item
CR_SIGNAL [CR]
Get the status if there is signal or no signal
CR_VMUTE [CR]
Get No show setting status
CR_FREEZE [CR]
Get Freeze setting status
CR_PTIMER [CR]
Get Timer operational status
CR_INFPFAIL [CR]
---
CR_TEMPWARN [CR]
Get if sensors are exceeding critical temperature or
not
CR_TEMPFAIL [CR]
Get the temperature when sensors approached critical
temperature
Page 13 / 53