![background image](http://html.mh-extra.com/html/canon/lv-7555/lv-7555_specifications_62526025.webp)
MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.6.2 CF_SOURCE
COMMAND
COMMAND “CF_SOURCE_%1”[CR]
When Input
is 1
“DIGITAL”---- Select DVI input
“ANALOG”------ Select Analog input
“SCART”-------- Select Scar input
“HDCP”---------- Select DVI HDCP input
“OUT”------------ Select Monitor Out
When Input
is 2
“VIDEO”-------- Select composite video and video input
“YPBPR”-------- Select Y/Pb/Pr
“ANALOG”--------- Select RGB
When Input
is 3
“VIDEO”-------- Select composite video and video input
“S-VIDEO”---- Select S-Video input
“YPBPR”-------- Select Y/Pb/Pr
%1
When Input
is 4
Not select source (Network only)
Details
Select current selected Input sauce
Only valid when it is in the usual Power On state.
When selected Input does not meet the requirement for the specified %1, the
response will be “101” and the command is not be executed.
Acceptable
“000”[CR]
Response
Unacceptable “%%%”[CR]
8.6.3 CF_INPUT1
COMMAND
COMMAND “CF_INPUT_%1”[CR]
%1
“DIGITAL”---- select DVI input
“ANALOG”------ Select Analog input
“SCART”-------- Select Scart input
“HDCP”---------- Select DVI HDCP input
“OUT”------------ Select Monitor Out
Details
Select Input-1 and specified source by %1 at the same time.
(Only valid when it is in the usual Power On state.)
Note)When Input1 is set to Monitor OUT, the command is valid and response
is error code, “101”.
Acceptable
“000”[CR]
Response
Unacceptable “%%%”[CR]
8.6.4 CF_INPUT2
COMMAND
COMMAND “CF_INPUT2_%1”[CR]
%1
“VIDEO”-------- Select composite video input
“YPBPR”-------- Select Y/Pb/Pr
“ANALOG”--------- Select RGB
Details
Select Input-2 and specified source by %1 at once.
(Only valid when it is in the usual Power On state.)
Acceptable
“000”[CR]
Response
Unacceptable “%%%”[CR]
Page 25 / 53