![background image](http://html.mh-extra.com/html/canon/lv-7555/lv-7555_specifications_62526020.webp)
MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.4.16 CF_TURBO COMMAND
COMMAND “CF_TURBO_%1”[CR]
%1
“ON”---- Set Bright SW to ON.
“OFF”-- Set Bright SW to OFF.
Details
Set Bright SW to the status by %1specification
(Only valid when it is in the usual Power On state.)
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.5 PC Control Series COMMAND
8.5.1 CF_FSYNC
COMMAND
COMMAND
“CF_FSYNC_%1”[CR]
%1
“0000-0031”---- Directly set Fine Sync setting value
“UP”------------------ Fine Sync setting value +1
“DN”------------------ Fine Sync setting value -1
Details
Set Fine Sync of PC signal.(Only valid when it is in the usual Power On
state.)
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting.
(Stand By mode stays.)
Note:When %1 is directly specified, this command is not enough to execute
for the screen. To show up on the image, issue CF_SETPCADJ
COMMAND.
Acceptable
“000”[CR]
Response
Unacceptable “101”[CR] ---- When Input is Video Series
8.5.2 CF_TDOTS
COMMAND
COMMAND “CF_TDOTS_%1”[CR]
%1
“nnnn-9999”-- Directly set Total Dots value
“nnnn” means minimum value.
This is the total value of current display Dots value+ horizontal position value
“UP”---------------- Total Dots setting value+1
“DN”---------------- Total Dots setting value-1
Details
Set Total Dots of PC signal.(Only valid when it is in the usual Power On
state.)
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (StanBy mode stays)
Note:When %1 is directly specified, this command is not enough to execute
for the screen. To show up on the image, issue CF_SETPCADJ
COMMAND.
Acceptable
“000”[CR]
Response
Unacceptable “101”[CR] ---- When Input is Video Series
Page 20 / 53