![background image](http://html.mh-extra.com/html/canon/lv-7555/lv-7555_specifications_62526016.webp)
MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.4.3 CF_COLOR
COMMAND
COMMAND “CF_COLOR_%1”[CR]
%1
“000-063”------ Directly select for color setting value
“UP”---------------- Color setting value +1
“DN”---------------- Color setting value -1
Details
Set the user control color value.
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
usual Power On state.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.4 CF_TINT
COMMAND
COMMAND “CF_TINT_%1”[CR]
%1
“000-063”------ Directly select for the Tint setting value
“UP”---------------- Current setting value+1
“DN”---------------- Current setting value -1
Details
Set the user control tint value
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
normal Power On state.)
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.5 CF_SHARP
COMMAND
COMMAND “CF_SHARP_%1”[CR]
%1
“000-031”------ Directly select for sharpens setting value
“UP”---------------- Current setting value +1
“DN”---------------- current setting value -1
Details
Set the user control sharpness value.
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
usual Power On state.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
Page 16 / 53