COPIER > ADJUST > FEED-ADJ
Item
Description
Default value
±0
ADJ-C1Y
Title
Adjustment of the write start position in the vertical scanning direction at pickup from the Cassette
1
Details
To adjust the write start position in the vertical scanning direction at pickup from the Cassette 1.
As the value is changed by 1, the leading edge margin is increased by approx. 0.001 mm.
+: Leading edge margin becomes larger. (An image moves to the trailing edge.)
-: Leading edge margin becomes smaller. (An image moves to the trailing edge.)
When replacing the Engine Controller PCB/clearing RAM data, enter the value of service label.
Use case
When replacing the Engine Controller PCB/clearing RAM data
Adj/set/operate method
1) Enter the setting value (switch negative/positive by -/+ key) and press Yes key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-5080 to 5080(-0.2inch to +0.2inch)
Unit
0.001mm
Default value
±0
ADJ-C1X
Title
Adjustment of the write start position in the horizontal scanning direction for the Cassette 1
Details
To adjust the write start position in the horizontal scanning direction for the Cassette 1.
As the value is changed by 1, the margin on the left edge of paper is increased by approx. 0.001
mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the Engine Controller PCB/clearing RAM data, enter the value of service label.
Use case
When replacing the Engine Controller PCB/clearing RAM data
Adj/set/operate method
1) Enter the setting value (switch negative/positive by -/+ key) and press Yes key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-3048 to 3048(-0.12inch to +0.12inch)
Unit
0.001mm
Default value
±0
ADJ-C1YR
Title
Adjustment of the write start position in the vertical scanning direction at 2-sided printing for the
Cassette 1
Details
To adjust the write start position in the vertical scanning direction at 2-sided printing for the Cassette
1. As the value is changed by 1, the leading edge margin is increased by approx. 0.001 mm.
+: Leading edge margin becomes larger. (An image moves to the trailing edge.)
-: Leading edge margin becomes smaller. (An image moves to the trailing edge.)
When replacing the Engine Controller PCB/clearing RAM data, enter the value of service label.
Use case
When replacing the Engine Controller PCB/clearing RAM data
Adj/set/operate method
1) Enter the setting value (switch negative/positive by -/+ key) and press Yes key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-5080 to 5080(-0.2inch to +0.2inch)
Unit
0.001mm
Default value
±0
ADJ-C1XR
Title
Adjustment of the write start position in the horizontal scanning direction at 2-sided printing for the
Cassette 1
Details
To adjust the write start position in the horizontal scanning direction at 2-sided printing for the Cas-
sette 1.
As the value is changed by 1, the margin on the left edge of paper is increased by approx. 0.001
mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the Engine Controller PCB/clearing RAM data, enter the value of service label.
Use case
When replacing the Engine Controller PCB/clearing RAM data
Adj/set/operate method
1) Enter the setting value (switch negative/positive by -/+ key) and press Yes key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-3048 to 3048(-0.12inch to +0.12inch)
Unit
0.001mm
7. Service Mode
135
