Canon LBP253 SM, Manual

Page: 105 / 167

Fixing System
Removing the Fixing Unit
■ Preparations
1. Remove Left Cover. “Removing the Left Cover” on
page 80
2. Remove Right Cover. “Removing the Right Cover”
on page 80
3. Remove Rear Cover Unit. “Removing the Rear Cover
Unit / Duplex Feed Unit” on page 81
■ Procedure
CAUTION:
When removing the fixing assembly, perform the
operation after the fixing assembly is surely cooled.
The fixing assembly just after printing may cause burn
injury.
1. Close Front Cover. Turn a gear to the position that
can take off the fixing assembly.
2. Remove 3 gears.
CAUTION:
Points to Note at Installation:
• Close Front Cover.
• Fit the Protrusion [2] of the Gear [1] With the Cut-
off of the Gear [3] and Install it.
• Fit the Cut-off [4] of the Gear [1] With the Teeth of
the Fan Gear [5] and Install it.
[1]
[1]
[2]
[5]
[3]
[4]
4. Disassembly/Assembly
98