3. PSWD-SW: 2
4. Click “Logout” to end the operation.
NOTE:
After login, if you close the browser without “logout”, it is recognized that you have been “logged in”. Therefore, in order to
log in to service mode again, you must wait for a certain period of time (3 minutes) from the last access to make the system
timeout or turn OFF/ON the power.
COPIER
■ VERSION
COPIER > DISPLAY > VERSION
Item
Description
VERSION
Title
Version
Details
MAIN: Bootable version
BOOT: BootROM version
LANG: Language pack version
DEMODATA: Demo print data version
ECONT: Printer ROM version
PANEL: Panel microcomputer firmware version
Adj/set/operate method
None (display only)
Display/adj/set range
00.00 to 99.99
Default value
0
ERR
Title
Error code display
Details
Error code display screen
To display the error code and detail code of the system error.
Adj/set/operate method
None (display only)
JAM
Title
Jam log
Details
To display the jam history.
Adj/set/operate method
None (display only)
USER
Title
SPDTYPE:To display the engine speed type (ppm) of Controller Board.
Details
To display the engine speed type (ppm) of Controller Board.
Use case
When checking the engine speed type
Adj/set/operate method
None (display only)
Display/adj/set range
00 to 99
■ ADJUST
COPIER > ADJUST > FEED-ADJ
Item
Description
ADJ-MFY
Title
Adjustment of the write start position in the vertical scanning direction when picking up paper from
the Multi-purpose Tray
7. Service Mode
133
