Canon LBP253 SM Manual Download Page 116

Page: 116 / 167

• PC

• Compatible to the selected
• OSMemory (RAM): 128MB or more free space
• Hard Disk: 100MB or more free space
• Display: 640x480 pixels or more in resolution, 256 tones or more
• With USB ports

• UST file for this product*

*: Download the corresponding file from the service site (ask the service technician in charge for details)

• USB cable (USB1.1/2.0)

● Before Downloading the System Software

1. Start up the PC.

2. Connect the host machine and the PC with a USB cable.

3. Turn on the host machine, and place it in the standby status.

● Downloading System Software

1. Home key or Menu key > System Management Settings > Update Firmware > Via PC

2. Open UST.

3. Take a note of the firmware version to upgrade and click [Next] button.

5. Troubleshooting

109

Summary of Contents for LBP253 SM








































































































































































Search results

Summary of Contents for LBP253 SM

Reviews:

Related manuals for LBP253 SM

Brands by name

Popular brands

Canon LBP253 SM, Manual

Search results

Summary of Contents for LBP253 SM

Reviews:

Related manuals for LBP253 SM

Brands by name

Popular brands