Canon LASERBASE MF3110 User Manual Download Page 40

Page: 40 / 75

8-1

CHAPTER

Maintenance

This chapter explains how to clean the machine, replace the toner cartridge, and repack and transport the machine.

Periodic Cleaning

Your machine requires little periodic maintenance. This section describes the necessary cleaning
procedures for your machine.

CAUTION

•

When cleaning the machine's exterior or the platen glass, be sure to disconnect the power cord before

cleaning the machine.

•

Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the

components or generate static charges.

Use a soft cloth to avoid scratching the components.

•

Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to clean the

interior of the machine; these can damage the machine's components.

Cleaning the Exterior

Wipe the machine's exterior with a clean, soft, lint-free cloth moistened with water or diluted
dishwashing detergent solution.

Cleaning the Scanning Area

Wipe the scanning area (shaded area) with a clean, soft, lint-free cloth moistened with water, then wipe
with a clean, soft, dry, lint-free cloth.

Platen glass cover

Platen glass

Summary of Contents for LASERBASE MF3110












































































Search results

Summary of Contents for LASERBASE MF3110

Reviews:

Related manuals for LASERBASE MF3110

Brands by name

Popular brands

Canon LASERBASE MF3110, User Manual

Search results

Summary of Contents for LASERBASE MF3110

Reviews:

Related manuals for LASERBASE MF3110

Brands by name

Popular brands