Canon Ixus 132 Page 250 User Manual Download

Page: 250 / 335

250

Contents

Chapter Contents

Formatting Memory Cards

Before using a new memory card or a card formatted in another

device, you should format the card with this camera.

Formatting erases all data on a memory card. Before formatting,

copy images on the memory card to a computer, or take other

steps to back them up.

Access the [Format]

screen.

Choose [Format], and then

press the <

> button.

Choose [OK].

Press the <

> buttons

to choose [Cancel], press the

> buttons to choose

[OK], and then press the <

button.

Format the memory

card.

To begin the formatting process,

press the <

> buttons to

choose [OK], and then press the

> button.

When formatting is finished,

[Memory card formatting

complete] is displayed. Press

the <

> button.

Summary of Contents for Ixus 132
















































































































































































































































































































































Search results

Summary of Contents for Ixus 132

Reviews:

Related manuals for Ixus 132

Brands by name

Popular brands

Canon Ixus 132, User Manual

Search results

Summary of Contents for Ixus 132

Reviews:

Related manuals for Ixus 132

Brands by name

Popular brands