Canon Ixus 132 User Manual Download Page 150

Page: 150 / 335

150

Contents

Chapter Contents

Adjust the volume.

Press the <

> buttons to

adjust the volume. Even after

the volume indicator disappears,

you can adjust the volume by

pressing the <

> buttons.

Pause playback.

To pause or resume playback,

press the <

> button.

After the movie is finished,

[

] is displayed.

•

To switch to Shooting mode from Playback mode, press the shutter

button halfway.

•

To deactivate Scroll Display, press the <

> button, choose

[Scroll Display] on the [

] tab, and then choose [Off].

•

If you prefer to have the most recent shot displayed when you enter

Playback mode, press the <

> button, and on the [

] tab,

choose [Resume] and then [Last shot].

•

To change the transition shown between images, press the

> button, choose [Transition] on the [

] tab, and then

press the <

> buttons to choose the effect.

Volume Indicator

Summary of Contents for Ixus 132
















































































































































































































































































































































Search results

Summary of Contents for Ixus 132

Reviews:

Canon Ixus 132, User Manual, Page: 150 / 335

Search results

Summary of Contents for Ixus 132

Reviews: