Canon Ixus 132 Page 237 User Manual Download

Page: 237 / 335

237

Contents

Chapter Contents

Editing or Erasing Wi-Fi Settings

Edit or erase Wi-Fi settings as follows.

Editing Connection Information

Edit connection information saved to the camera. You can change

device nicknames (display names) that are displayed on the

camera, and erase connection information.

The following explains the procedure when the target device is a

computer.

Access the Wi-Fi menu.

Pressing the <

> button will

show recent target devices. To

access the Wi-Fi menu, press

the <

> buttons.

Choose a device to edit.

Press the <

buttons to choose the icon of

the device to edit, and then

press the <

> button.

Choose [Edit a Device].

Press the <

> buttons

to choose [Edit a Device], and

then press the <

> button.

Summary of Contents for Ixus 132
















































































































































































































































































































































Search results

Summary of Contents for Ixus 132

Reviews:

Related manuals for Ixus 132

Brands by name

Popular brands

Canon Ixus 132, User Manual

Search results

Summary of Contents for Ixus 132

Reviews:

Related manuals for Ixus 132

Brands by name

Popular brands