manualshive.com logo in svg

Canon Ixus 132, User Manual

Share
Download
Canon Ixus 132 User Manual Download Page 181

181

ç

 Contents

ç

 Chapter Contents

3

  Adjust the cropping 

area.

X

X

A frame is displayed around 

the portion of the image to be 

cropped.

X

X

The original image is shown in 

the upper left, and a preview of 

the image as cropped is shown 

in the lower right.

z

z

To resize the frame, move the 

zoom lever.

z

z

To move the frame, press the 

<

o

><

p

><

q

><

r

> buttons.

z

z

To change the frame orientation, 

press the <

m

> button.

z

z

Press the <

n

> button.

4

  Save as a new image 

and review.

z

z

Follow steps 4 – 5 in “Resizing 

Images” (

=

 

 179

).

• 

Editing is not possible for images shot at a resolution of 

[ ] (

=

 

 86

) or resized to [ ] (

=

 

 178

).

• 

Images supported for cropping will have the same aspect ratio after 

cropping.

• 

Cropped images will have a smaller resolution than uncropped 

images.

Resolution After Cropping

Preview of Image After Cropping

Cropping Area

Summary of Contents for Ixus 132
















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands