Canon Ixus 132 User Manual Download Page 249

Page: 249 / 335

249

Contents

Chapter Contents

Screen Brightness

Adjust screen brightness as follows.

Choose [LCD Brightness], and

then press the <

> buttons

to adjust the brightness.

•

For maximum brightness, press and hold the <

> button for at

least one second when the shooting screen is displayed or when in

single-image display. (This will override the [LCD Brightness] setting

on the [

] tab.) To restore the original brightness, press and hold

the <

> button again for at least one second or restart the camera.

Hiding the Start-up Screen

If you prefer, you can deactivate display of the start-up screen

normally shown when you turn the camera on.

Choose [Start-up Image], and

then choose [Off].

Summary of Contents for Ixus 132
















































































































































































































































































































































Search results

Summary of Contents for Ixus 132

Reviews:

Canon Ixus 132, User Manual, Page: 249 / 335

Search results

Summary of Contents for Ixus 132

Reviews: