Canon Ixus 132 Page 234 User Manual Download

Page: 234 / 335

234

Contents

Chapter Contents

Sending Images to a Computer

via CANON iMAGE GATEWAY

Images on the memory card that have not been transferred

already can be sent to a computer via CANON iMAGE GATEWAY.

If the computer that you intend to send images to is turned off,

the images will be stored temporarily on the CANON iMAGE

GATEWAY server. However, the images will be deleted after a

while. Start up the computer so that they can be saved.

Choose the type of

images to send (only

when sending movies

with images).

Press the <

> button, and

then choose [Wi-Fi Settings] on

the [

] tab (

Press the <

> buttons to

choose [Send via Server], press

the <

> buttons to choose

[Stills/Movies], and then press

the <

> button.

When sending only images, go

to step 2.

Send the images.

Follow the steps in “Connecting

to Web Services” (

206

) to

choose [

Summary of Contents for Ixus 132
















































































































































































































































































































































Search results

Summary of Contents for Ixus 132

Reviews:

Related manuals for Ixus 132

Brands by name

Popular brands

Canon Ixus 132, User Manual

Search results

Summary of Contents for Ixus 132

Reviews:

Related manuals for Ixus 132

Brands by name

Popular brands