manualshive.com logo in svg

Canon Ixus 132, User Manual, Page: 331 / 335

Share
Download
Canon Ixus 132 User Manual Download Page 331

331

ç

 Contents

Digital Camera, Model 

IXUS 140

 PC1889/ 

IXUS 135

 PC1896 systems

This product is installed with the WLAN Module which is certified 

to standards set by IDA Singapore.

USA and Canada only:

The Lithium ion/polymer battery that powers the product is 

recyclable.

Please call 1-800-8-BATTERY for information on how to 

recycle this battery.

For CA, USA only

Included lithium battery contains Perchlorate Material - special handling 

may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

Trademark Acknowledgments

• 

The SDXC logo is a trademark of SD-3C, LLC.

• 

This device incorporates exFAT technology licensed from 

Microsoft.

• 

Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected 

Setup™ are trademarks or registered trademarks of the Wi-Fi 

Alliance.

Summary of Contents for Ixus 132
















































































































































































































































































































































Reviews:

No comments