Canon Ixus 132 User Manual Download Page 186

Page: 186 / 335

186

Contents

Chapter Contents

Movies

Editing Movies

You can cut movies to remove unneeded portions at the beginning

or end.

Choose [

Following steps 1 – 5 in

“Viewing” (

148

), choose [

]

and press the <

> button.

The movie editing panel and

editing bar are now displayed.

Specify portions to cut.

Press the <

> buttons to

choose [ ] or [ ].

To view the portions you can

cut (identified by [

] on the

screen), press the <

buttons to move [ ]. Cut the

beginning of the movie (from

[ ]) by choosing [ ], and

cut the end of the movie by

choosing [ ].

Movie Editing Panel

Movie Editing Bar

Summary of Contents for Ixus 132
















































































































































































































































































































































Search results

Summary of Contents for Ixus 132

Reviews:

Canon Ixus 132, User Manual, Page: 186 / 335

Search results

Summary of Contents for Ixus 132

Reviews: