manualshive.com logo in svg

Canon iR2018i, Reference Manual, Page: 72 / 444

Share
Download
Canon iR2018i Reference Manual Download Page 72

Using the Touch Panel Display

2-15

2

B

a

s

ic

 O

per

at

ion

s

Using the Touch Panel Display

This section describes the keys that are frequently used on the touch panel display. Information 
on how to adjust the brightness of the touch panel display is also provided.

CAUTION

 

Press the touch panel display keys gently with your fingers. Do not press the touch panel 
display with a pencil, ballpoint pen, or other sharp objects that can scratch the surface of the 
touch panel display. Doing so may damage the touch panel display.

NOTE

 

Before using the touch panel display, peel off the protective film from the display. 

 

Frequently Used Keys

The keys that are used frequently on the touch panel display are:

Press to cancel the mode that you are currently setting, or a mode that has already been 
set, on screens other than the Additional Functions screen. Also, press to close the 
current mode’s setting screen, and keep the original settings set from the Additional 
Functions screen.

Press to confirm the current settings and proceed to the next step in the procedure.

Press to go back to the previous step in the procedure, without saving the current 
settings.

Press to close the current screen.

Press to confirm the current settings of a mode.

Summary of Contents for iR2018i





























































































































































































































































































































































































































































Reviews:

No comments