Canon iR2018i, Reference Manual, Page: 104 / 444

Making Prints Using the Stack Bypass 2-47
2
B
a
s
ic
O
per
at
ion
s
IMPORTANT
•
When loading paper into the stack bypass, align the paper stack neatly between the slide guides.
If the paper is not loaded correctly, a paper jam may occur.
•
If you are printing on heavyweight paper or envelopes using the stack bypass, and find that the
paper or envelopes are not being fed smoothly or evenly through the stack bypass, remove the
paper or envelopes, curl the feeding edges upward approximately 3 mm, and then reload the
paper or envelopes. Curling the feeding edges enables the rollers to grip the paper or envelopes
as they are fed into the stack bypass.
NOTE
•
If there are instructions on the paper package about which side of the paper to load, follow those
instructions.
•
When the paper is loaded into the stack bypass, the side facing down is the one printed on.
•
If problems, such as poor print quality or paper jams occur, try turning the paper stack over and
reload it.
•
For more information on the print direction of preprinted paper (paper which has logos or
patterns already printed on it), see “Relationship between Original Orientation and Preprinted
Paper Output Chart,” on p. 9-9.
●
If you are loading envelopes into the stack bypass:
❑
Take five envelopes, loosen them as shown, and then stack them together. Repeat this step
five times for each set of five envelopes.