manualshive.com logo in svg

Canon iR2018i, Reference Manual, Page: 319 / 444

Share
Download
Canon iR2018i Reference Manual Download Page 319

Paper Drawers

7-2

7

Ro

utin

e M

a

in

ten

anc

e

Paper Drawers

This section describes how to load paper into the paper drawers.

NOTE

 

•

The following paper sizes can be loaded into the paper drawers 1, 2, 3, and 4.
- A5

- A4

- A4R
- A3

•

For the iR2018i,  the paper drawer 2 can only be used if the optional Cassette Feeding Module-P1 is 
attached to the machine.

•

Paper drawers 3 and 4 can only be used if the optional Cassette Feeding Module-Q1 is attached to the 
iR2030/iR2025/iR2022i/iR2018i.

•

For more information on available paper stock that can be loaded into the paper drawers, see “Available 
Paper Stock,” on p. 2-56.

 

Loading Paper

If the selected paper runs out, or the selected paper drawer runs out of paper during printing, a 
screen prompting you to load paper appears on the touch panel display, and the error indicator 
blinks in red.

Follow the procedure below to load paper into the paper drawers.

Summary of Contents for iR2018i





























































































































































































































































































































































































































































Reviews:

No comments