Canon iR2018i Reference Manual Download Page 286

Page: 286 / 444

Device Information Settings

6-33

ste

anag

tti

ngs

Enter the name and location of the machine.

❑

Press [Device Name]

➞

enter the name of the machine

➞

press [OK].

❑

Press [Location]

➞

enter the place where the machine is located

➞

press [OK].

❑

Press [OK].

The maximum number of characters that can be entered is 32.

If you do not want to store the name and location of the machine, press [Cancel].

The device name and the location of the machine are set.

NOTE

For instructions on entering characters, see “Entering Characters from the Touch Panel Display,”
on p. 2-19.

Press [Done] repeatedly until the Basic Features screen appears.

Summary of Contents for iR2018i





























































































































































































































































































































































































































































Search results

Summary of Contents for iR2018i

Reviews:

Canon iR2018i, Reference Manual, Page: 286 / 444

Search results

Summary of Contents for iR2018i

Reviews: