Canon iR2018i, Reference Manual, Page: 422 / 444

List of Error Messages 8-47
8
T
ro
u
b
les
ho
oti
n
g
Place the original on the platen glass.
Cause The specified mode requires that the original be placed on the platen glass, but there is no
original on the platen glass.
Remedy Place the original on the platen glass.
Platen Glass is dirty.
Cause The feeder’s scanning area is dirty.
Remedy Clean the feeder’s scanning area. (See “Manual Feeder Cleaning,” on p. 7-37.)
Remove the original from the feeder.
Cause The machine cannot scan your original using the feeder. An original is placed in the feeder
and on the platen glass.
Remedy Remove the original from the feeder.
Remove the paper from the output tray.
Cause Prints from the previous job remain in the output tray.
Remedy Remove the prints remaining in the output tray. Printing automatically resumes.
Replace the toner.
Cause Printing is not possible because the toner has run out.
Remedy Replace the toner cartridge. (See “Replacing the Toner Cartridge,” on p. 7-22.)
Return page 1 to the top, and then press the Start key.
Cause Scanning was stopped due to a problem with the feeder.
Remedy Arrange the originals in page order with the first page on top. Place the originals back into the
feeder’s original supply tray, and press
(Start).
Waste toner is full./Replace the drum.
Cause The drum unit is filled with waste toner.
Remedy Replace the drum unit. (See “Replacing the Drum Unit,” on p. 7-28.)