Canon IR 2420, Network Manual

Page: 31 / 113

Specifying IP Addresses 2-14
Co
nn
e
c
tin
g
th
e Ma
ch
in
e
to
a TC
P/IP
Ne
twor
k
2
6
Select how to assign the machine’s IP address.
●
If you want to automatically assign an IP address to the machine:
NOTE
•
Even if you select ‘On’ for [DHCP], [BOOTP], or [RARP], you should enter an IP
address, subnet mask, and gateway address. If this information cannot be obtained
from the DHCP, BOOTP, or RARP server, the settings entered in this step are used.
•
If the machine is restarted after DHCP, BOOTP, or RARP settings are complete, the
TCP/IP Settings menu displays the IP address setting values obtained from the
DHCP, BOOTP, or RARP server. (If the IP address, host name, and domain name
have been previously set, they will be overwritten by the setting values obtained
from DHCP, BOOTP, or RARP.)
•
If you use DHCP without the DNS dynamic update function, it is recommended that
an identical IP address be assigned to the machine at all times. (If the IP address is
not identical, the host name for the machine will not correspond to the IP address.)
•
It takes about two minutes to check whether the DHCP, BOOTP, or RARP settings
can be used. If you plan to use none of these settings, it is recommended that you
turn them off.
❑
Use [ ] or [ ] to select
<IP Address Auto.>
➞
press [OK].
❑
Use [ ] or [ ] to select <DHCP>,
<BOOTP>, or <RARP>
➞
press [OK].
❑
Use [ ] or [ ] to select <On>
➞
press
[OK].
❑
Press (Back) to return to the IP
Address Settings menu.
IP Address Auto.
IP Address
Subnet Mask
Gateway Address
IP Address Settings
DHCP
BOOTP
RARP
IP Address Auto.
Off
On
DHCP