Canon IR 2420, Network Manual

Page: 60 / 113

Access Control 2-43
Co
nn
e
c
tin
g
th
e Ma
ch
in
e
to
a TC
P/IP
Ne
twor
k
2
●
If you want to specify a range of IPv4 addresses to accept or reject:
IMPORTANT
•
A total of four (ranges of) IPv4 addresses can be set for this function.
•
When you enter a range of IP addresses, make sure that the number entered in
[First Address] is less than the number entered in [Last Address].
●
If you want to specify a single IPv6 address to accept or reject:
NOTE
If you want to change the entry mode, press (Tone), or use [ ] or [ ] to select
<Entry Mode>
➞
press [OK]. You can select <Aa>(Alphabet) or <12>(Number). For
more information, see Chapter 2, “Basic Operations,” in the Reference Guide .
❑
Enter the first IP address (at which the
range begins) using
- (numeric
keys)
➞
press [OK].
❑
Enter the last IP address (at which the
range ends) using
- (numeric keys)
➞
press [OK].
To enter another IP address or change
the settings of the registered IP
addresses, repeat steps 9 to 11.
❑
Enter the desired IPv6 address using -
(numeric keys)
➞
use [ ] or [ ] to
select <Set>
➞
press [OK].
❑
Use [ ] or [ ] to select <Prefix Address>
➞
press [OK].
222.222.222.222
First Address
222.222.223.223
Last Address
0000:0000:0000:0000
Set
Entry Mode: Aa
IPv6 Address
Single Address
Multiple Dest.
Prefix Address
Register