manualshive.com logo in svg

Canon iPF8400S Series, Service Manual

The Canon iPF8400S Series is a professional-grade printer, offering stunning print quality and color accuracy. To assist users in setting up and maximizing their printer's potential, we provide a comprehensive Setup Manual that can be easily downloaded for free from our website, manualshive.com.

Share
Download
background image

Chapter 1  

1-30

T-1-15

Setting Item 

Description/Instructions 

[Interfac
e Setup]

[EOP Timer]

Specify the timeout period before cancellation of print jobs that cannot be received by the 
printer.

[TCP/IP]

[IPv4]

[IPv4 Mode]

Choose whether the printer IP address is configured automatically or a static IP address is 
entered manually.

[Protocol]

[DHCP]/
[BOOTP]/
[RARP]

Specify the protocol used to configure the IP address automatically.

[IPv4 Settings]

[IP Address]/
[Subnet Mask]/
[Default G/W]

Specify the printer network information when using a static IP address.
Enter the IP address assigned to the printer, as well as the network subnet mask and default 
gateway.

[DNS Settings] [DNS Dync 

update]

Specify whether DNS server registration is updated automatically.

[Pri. DNS 
SrvAddr]/[Sec. 
DNS SrvAddr]

Specify the DNS server address.

[DNS Host 
Name]

Specify the DNS host name.

[DNS Domain 
Name]

Specify the DNS domain name.

[IPv6]

[IPv6 Support]

Set whether to support IPv6 connection.

[IPv6 StlessAddrs]

Set whether to use IPv6 stateless address.

[DHCPv6]

Set whether to use DHCPv6 setting.

[DNS Settings] [DNS Dync 

update]-
[Statefull 
Addr]/
[Stateless 
Addr]

Specify whether DNS server registration is updated automatically.

[Pri. DNS 
SrvAddr]/[Sec. 
DNS SrvAddr]

Specify the DNS server address.

[DNS Host 
Name]

Specify the DNS host name.

[DNS Domain 
Name]

Specify the DNS domain name.

[NetWare]

[NetWare]

Specify the NetWare protocol. To apply your changes, choose Register Setting.

[Frame Type]

Specify the frame type to use.

[Print Service]

Choose the print service.

[AppleTalk]

Specify whether to use the AppleTalk protocol. To apply your changes, choose Register 
Setting.

[Ethernet 
Driver]*12

[Auto Detect]

Specify the communication method. To apply your changes, choose Register Setting.
Choose On for automatic configuration of the LAN communication protocol. Choose Off to 
use settings values of Comm.Mode and Ethernet Type.

[Comm.Mode]

Choose the LAN communication method.

[Ethernet Type]

Choose the LAN transfer rate.

[Spanning Tree]

Choose whether spanning-tree packets are supported over the LAN.

[MAC Address]

Displays the MAC address.

[Interface Print]

Print the interface settings.

[Return Defaults]

Select [OK] to return the [Interface Setup] settings to factory default.

Summary of Contents for iPF8400S Series

























































































































































































































































































































Reviews:

No comments

Related manuals for iPF8400S Series

Canon imagePROGRAF TM-200 Online Manual preview
imagePROGRAF TM-200
Brand: Canon Pages: 930

Brands by name

Popular brands

Load more brands