Canon iPF8400S Series, Service Manual

Page: 245 / 312

Chapter 7
7-27
h) INITIALIZE
Clear the [DISPLAY] histories, [ADJUST] settings, [COUNTER] values, and other parameters.
Display Description
WARNING Initialize the history of WARNING.
(All displayed contents of [DISPLAY] > [WARNING] will be initialized.)
ERROR Initialize the history of ERROR.
(All displayed contents of [DISPLAY] > [ERROR] will be initialized.)
JAM Initialize the history of JAM.
(All displayed contents of [DISPLAY] > [JAM] will be initialized.)
ADJUST Initialize the value of band adjustment (by user) and head adjustment.
The automatically adjusted value will not be initialized.
W-INK Initialize the remaining capacity (%) of the maitenance cartridge.
(Clear [COUNTER] > [PRINTER] > [W-INK])
CARRIAGE Initialize the counter related to carriage unit.
(Clear [COUNTER] > [CARRIAGE])
PURGE Initialize the counter related to purge unit.
(Clear [COUNTER] > [PURGE])
INK-USE CNT Initialize the consumption amount of ink.
(Clear [COUNTER] > [INK-USE2], and count up [COUNTER] > [CLEAR] > [CLR-INK
CONSUME])
W-INK-CHG CNT Initialize the maintenance cartridge replacement frequency.
(Clear [COUNTER] > [EXCHANGE] > [MTC EXC.], and count up [COUNTER] > [CLEAR]
> [CLR-MTC EXC.])
HEAD-CHG L CNT Initialize the printhead L replacement frequency.
(Clear [COUNTER] > [EXCHANGE] > [HEAD L EXC.], and count up [COUNTER] >
[CLEAR] > [CLR-HEAD L EXC.])
HEAD-CHG R CNT Initialize the printhead R replacement frequency.
(Clear [COUNTER] > [EXCHANGE] > [HEAD R EXC.], and count up [COUNTER] >
[CLEAR] > [CLR-HEAD R EXC.])
HDD BOX PASS. ALL FOLDERS Initialize the BOX password of all folders of the hard disk drive to factory default.
FOLDER xx Initialize the BOX password of FOLDER xx of the hard disk drive to factory default.
PARTS-CHG
CNT PARTS xx-x xx-x: Unit number of consumable parts
(For details, refer to "Maintenance and Inspection" > "Consumable Parts")
Initialize the consumable part replacement frequency.
(Clear [COUNTER] > [EXCHANGE] > [xx-x EXC], and count up [COUNTER] > [CLEAR]
> [CLR xx-x EXC.])
PARTS
COUNTER PARTS xx-x xx-x: Unit number of consumable parts
(For details, refer to "Maintenance and Inspection" > "Consumable Parts")
Initialize the counter amount of the consumable parts.
(Clear [COUNTER] > [PARTS CNT.] > [COUNTER xx-x])
* After replacing the consumable part, be sure to execute this menu.
USER SETTING Initializes the user menu.
Same as executing the following mode in the user menu.
-[Set./Adj. Menu]-[System Setup]-[Reset PaprSetngs]
-[Set./Adj. Menu]-[Interface Setup]-[Return Defaults]
CA-KEY See "e-maintenance/imageWARE Remote" for detail.
ERDS-DAT See "e-maintenance/imageWARE Remote" for detail.
JOB LOG Initialize the history of JOB LOG.