Canon imageRUNNER ADVANCE C5235 Basic Operation Manual Download Page 145

Page: 145 / 208

145

oubleshooting

Remove any jammed paper from the lower delivery guide.

* Lower Delivery Guide

1. Turn the lever on the lower

delivery guide to the right
until it stops, and then tilt
the lower delivery guide to
the right.

2. Remove any jammed paper.
3. Return the delivery guide to

its original position.

When returning the lower delivery guide to its original position, be careful not to get your fi ngers
caught, as this may result in personal injury.

Close the front cover of the fi nisher.

When closing the cover, be careful not to get your fi ngers caught, as this may result in personal
injury.

Follow the instructions on the screen.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper
jam is cleared.

Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012

Summary of Contents for imageRUNNER ADVANCE C5235

















































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C5235

Reviews:

Related manuals for imageRUNNER ADVANCE C5235

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C5235, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C5235

Reviews:

Related manuals for imageRUNNER ADVANCE C5235

Brands by name

Popular brands