Canon imageRUNNER ADVANCE C5235 Basic Operation Manual Download Page 44

Page: 44 / 208

• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/

PIN). If the Copy Card Reader-F1 is attached, fi rst insert a control card.

• If a login service, such as Department ID Management or SSO-H has been set, press

(Log In/Out) to log out.

Selecting Function

Select [Scan and Store] from the Main Menu screen.

Press [Scan and Store].

Select [Mail Box] from the screen where you can select the type of
storage location.

This section describes the fl ow of basic Scan and Store operations. It also describes an example of how to store scanned data in a mail
box.

Storing Scanned Data

Placing Originals

Place the original on the feeder or the platen glass.

Placing originals in the feeder

Adjust the slide guides to fi t the size of your originals. Neatly place
your originals with the side to be copied face up.

Placing originals on the platen glass

Open the feeder/platen cover.

Place your originals face down.

Gently close the feeder/platen cover.

Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012

Summary of Contents for imageRUNNER ADVANCE C5235

















































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C5235

Reviews:

Related manuals for imageRUNNER ADVANCE C5235

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C5235, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C5235

Reviews:

Related manuals for imageRUNNER ADVANCE C5235

Brands by name

Popular brands