manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5235, Basic Operation Manual, Page: 168 / 208

Share
Download
Canon imageRUNNER ADVANCE C5235 Basic Operation Manual Download Page 168

168

 

 

   Contacting Your Local Authorized Canon Dealer 

 If a screen prompting you to contact your local authorized Canon dealer is displayed, follow the procedure described below. 

1

Turn OFF the main power of the main unit.

2

3

1

1.  Open the main power switch 

cover.

2.  Press the main power switch 

to the “ ” side.

3.  Close the main power switch 

cover.

If you turn OFF the main power switch when there is a job waiting to print, that job is erased.

2

Wait at least 10 seconds after the Main Power Indicator is turned off , and then 
turn the main power switch back to ON.

2

3

1

1.  Open the main power switch 

cover.

2.  Press the main power switch 

to the “I” side.

3.  Close the main power switch 

cover.

Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012

Summary of Contents for imageRUNNER ADVANCE C5235

















































































































































































































Reviews:

No comments